Ksource on Facebook Ksource on Twitter Ksource on You Tube


Be aware that not all
automotive mirrors
con-form to Federal
Motor Vehicle Safety
Standards (FMVSS 111).
All FIT SYSTEM mirrors
have been manufactured
to these standards
to insure quality,
safety and uniformity.

S4. Flat plane mirrors must reflect a Unit Magnification. This means that anything you see in a mirror must be the same height and width as the actual object you are looking at; from the same distance.

S5. All inside rear view mirror lenses must be a flat plane lens of Unit Magnification.

S5.2 All outside mirror lenses on the driverís side must be a flat plane lens of Unit Magnification.

S5.3 Outside mirrors on the passenger's side may have either a flat plane lens; or a convex lens.

S5.4 If the lens is convex, an inscription must be permanently marked into it which reads "Objects in mirror are closer than they appear".

Technology. The appropriately name Vision System is one such innovation.


Technical Information
Page 1 of 6 Total 56 Records found.  
#   Tech Type   Part Number   Image   Description  
1. Universal 201 Not Available
2. Universal 202 Not Available
3. Universal 601 Not Available
4. Universal 901 Not Available
5. Universal 1001 Not Available
6. Universal 1002 Not Available
7. Universal 1201 Not Available
8. Universal 1301 Not Available
9. Universal 1401 Not Available
10. Universal 1600 Not Available
Total Pages:
1 2 3 4 5 6 Next
Move To