Ksource on Facebook Ksource on Twitter Ksource on You Tube

WE FOLLOW THE RULES

Be aware that not all
automotive mirrors
con-form to Federal
Motor Vehicle Safety
Standards (FMVSS 111).
All FIT SYSTEM mirrors
have been manufactured
to these standards
to insure quality,
safety and uniformity.



S4. Flat plane mirrors must reflect a Unit Magnification. This means that anything you see in a mirror must be the same height and width as the actual object you are looking at; from the same distance.

S5. All inside rear view mirror lenses must be a flat plane lens of Unit Magnification.

S5.2 All outside mirror lenses on the driverís side must be a flat plane lens of Unit Magnification.

S5.3 Outside mirrors on the passenger's side may have either a flat plane lens; or a convex lens.

S5.4 If the lens is convex, an inscription must be permanently marked into it which reads "Objects in mirror are closer than they appear".

Technology. The appropriately name Vision System is one such innovation.

 

Technical Information
Page 2 of 6 Total 56 Records found.  
#   Tech Type   Part Number   Image   Description  
11. Universal 1600B Not Available
12. Universal 1701 Not Available
13. Truck Universal H3511 Not Available
14. Truck Universal H3551 Not Available
15. Truck Universal H3571 Not Available
16. Truck Universal 3671 Not Available
17. Truck Universal 3721 Not Available
18. Truck Universal H3541 Not Available
19. Truck Universal H3641 Not Available
20. Truck Universal H3531B Not Available
Total Pages: Move To