Ksource on Facebook Ksource on Twitter Ksource on You Tube


Be aware that not all
automotive mirrors
con-form to Federal
Motor Vehicle Safety
Standards (FMVSS 111).
All FIT SYSTEM mirrors
have been manufactured
to these standards
to insure quality,
safety and uniformity.

S4. Flat plane mirrors must reflect a Unit Magnification. This means that anything you see in a mirror must be the same height and width as the actual object you are looking at; from the same distance.

S5. All inside rear view mirror lenses must be a flat plane lens of Unit Magnification.

S5.2 All outside mirror lenses on the driverís side must be a flat plane lens of Unit Magnification.

S5.3 Outside mirrors on the passenger's side may have either a flat plane lens; or a convex lens.

S5.4 If the lens is convex, an inscription must be permanently marked into it which reads "Objects in mirror are closer than they appear".

Technology. The appropriately name Vision System is one such innovation.


Technical Information
Page 3 of 6 Total 56 Records found.  
#   Tech Type   Part Number   Image   Description  
21. Truck Universal 3591W Not Available
22. Truck Universal 3791 Not Available
23. Truck Universal 3891 Not Available
24. VS VS1 Click here for detail
25. VS VS2 Click here for detail
26. VS VS3 Click here for detail
27. Universal 80700 Click here for detail
28. Universal 80800 Click here for detail
29. Universal 81800 Click here for detail
30. Universal 80900 Click here for detail
Total Pages: Move To