Ksource on Facebook Ksource on Twitter Ksource on You Tube


Be aware that not all
automotive mirrors
con-form to Federal
Motor Vehicle Safety
Standards (FMVSS 111).
All FIT SYSTEM mirrors
have been manufactured
to these standards
to insure quality,
safety and uniformity.

S4. Flat plane mirrors must reflect a Unit Magnification. This means that anything you see in a mirror must be the same height and width as the actual object you are looking at; from the same distance.

S5. All inside rear view mirror lenses must be a flat plane lens of Unit Magnification.

S5.2 All outside mirror lenses on the driverís side must be a flat plane lens of Unit Magnification.

S5.3 Outside mirrors on the passenger's side may have either a flat plane lens; or a convex lens.

S5.4 If the lens is convex, an inscription must be permanently marked into it which reads "Objects in mirror are closer than they appear".

Technology. The appropriately name Vision System is one such innovation.


Technical Information
Page 5 of 6 Total 56 Records found.  
#   Tech Type   Part Number   Image   Description  
41. Truck Universal 62076GE Not Available
42. Truck Universal 62075GE Not Available
43. Truck Universal 62075-76GE Not Available
44. Truck Universal 62078G Not Available
45. Truck Universal 62077G Not Available
46. Truck Universal 62077-78G Not Available
47. Truck Universal 62094G Not Available
48. Truck Universal 62093G Not Available
49. Truck Universal 62093-94G Not Available
50. Truck Universal 60112C Not Available
Total Pages: Move To