Ksource on Facebook Ksource on Twitter Ksource on You Tube


Be aware that not all
automotive mirrors
con-form to Federal
Motor Vehicle Safety
Standards (FMVSS 111).
All FIT SYSTEM mirrors
have been manufactured
to these standards
to insure quality,
safety and uniformity.

S4. Flat plane mirrors must reflect a Unit Magnification. This means that anything you see in a mirror must be the same height and width as the actual object you are looking at; from the same distance.

S5. All inside rear view mirror lenses must be a flat plane lens of Unit Magnification.

S5.2 All outside mirror lenses on the driverís side must be a flat plane lens of Unit Magnification.

S5.3 Outside mirrors on the passenger's side may have either a flat plane lens; or a convex lens.

S5.4 If the lens is convex, an inscription must be permanently marked into it which reads "Objects in mirror are closer than they appear".

Technology. The appropriately name Vision System is one such innovation.


Technical Information
Page 6 of 6 Total 56 Records found.  
#   Tech Type   Part Number   Image   Description  
51. Truck Universal 60111C Not Available
52. Truck Universal 60111-12C Not Available
53. Truck Universal 60114C Not Available
54. Truck Universal 60113C Not Available
55. Truck Universal 60113-14C Not Available
56. VS VS-8 Not Available
Total Pages:
Previous 1 2 3 4 5 6
Move To